Photosensing Device Composed of Bilayer Membranes of Polymer-Pendant Ru(bpy)3 2+ and Prussian Blue

A photosensing device was fabricated based on a photochemical electron transfer reaction. A graphite electrode was coated with bilayer membranes of polymer-pendant Ru(bpy)₃ ²⁺ and Prussian Blue (PB) to give a bilayer-coated device. It was irradiated with visible light in an aqueous electrolyte and the induced photocurrent was measured as a function of the applied potential. The excitation of PB was responsible for the anodic photocurrent, while the excitation of the Ru complex mainly induced the cathodic photocurrent by an electron-transfer mechanism.     

Application of Polymer-Embedded Tris(2,2′ Bipyridine-Ruthenium(II) to Photodetection of Oxygen

A Nafion film containing tris(2,2′-bipyridine)ruthenium(II) as a luminescence probe was applied to photodetection of oxygen in a gas by utilizing the luminescence quenching by dioxygen. The linear Stern-Volmer plots of the emission intensity with respect to the oxygen concentration allowed quantitative determination of the oxygen. From the emission decay studied by a single-photon counting method, it was concluded that the quenching of the excited state Ru complex by oxygen proceeds by a conventional dynamic mechanism.     

Internal radiocesium contamination of adults and children in Fukushima 7 to 20 months after the Fukushima NPP accident as measured by extensive whole-body-counter surveys

The Fukushima Dai-ichi NPP accident contaminated the soil of densely-populated regions in Fukushima Prefecture with radioactive cesium, which poses significant risks of internal and external exposure to the residents. If we apply the knowledge of post-Chernobyl accident studies, internal exposures in excess of a few mSv/y would be expected to be frequent in Fukushima.Extensive whole-body-counter surveys (n = 32,811) carried out at the Hirata Central Hospital between October, 2011 and November, 2012, however show that the internal exposure levels of residents are much lower than estimated. In particular, the first sampling-bias-free assessment of the internal exposure of children in the town of Miharu, Fukushima, shows that the ¹³⁷Cs body burdens of all children (n = 1,383, ages 6–15, covering 95% of children enrolled in town-operated schools) were below the detection limit of 300 Bq/body in the fall of 2012. These results are not conclusive for the prefecture as a whole, but are consistent with results obtained from other municipalities in the prefecture, and with prefectural data.     

Investigation of thermal hazard during the hydrosilylation of 1,6-divinyl(perfluorohexane) with trichlorosilane

In this study, we examined the reaction hazard during the hydrosilylation reaction between trichlorosilane (TCS) and 1,6-divinyl(perfluorohexane) (FDV) in the presence of a butanol solution of chloroplatinic acid (Pt-Cat) as the catalyst. Assuming the three industrial risks of excessive addition of Pt-Cat, contamination by iron rust and mixing with cooling water, we observed the temperature and pressure change of TCS/FDV with an excessive amount of Pt-Cat, TCS/FDV/Pt-Cat with Fe₂O₃ and TCS/FDV/Pt-Cat with distilled water, using an accelerating rate calorimeter (ARC). The temperature and pressure greatly increased, especially in the sample with Fe₂O₃. For instance, in TCS/FDV/Pt-Cat with 1.5 wt.% Fe₂O₃, the heat release rate exceeded 624 K · min^?1 and the pressure rose above 25 MPa during the exothermic reaction.     

The electronic band structure analysis of OLED device by means of in situ LEIPS and UPS combined with GCIB

Low-energy inverse photoelectron spectroscopy (LEIPS) and ultraviolet photoelectron spectroscopy (UPS) incorporated into the multitechnique XPS system were used to probe the ionization potential and the electron affinity of organic materials, respectively. By utilizing gas cluster ion beam (GCIB), in situ analyses and depth profiling of LEIPS and UPS were also demonstrated. The band structures of the 10-nm-thick buckminsterfullerene (C₆₀) thin film on Au (100 nm)/indium tin oxide (100 nm)/glass substrate were successfully evaluated in depth direction.     

High‐Quality Three‐Dimensional Nanoporous Graphene

We report three‐dimensional (3D) nanoporous graphene with preserved 2D electronic properties, tunable pore sizes, and high electron mobility for electronic applications. The complex 3D network comprised of interconnected graphene retains a 2D coherent electron system of massless Dirac fermions. The transport properties of the nanoporous graphene show a semiconducting behavior and strong pore‐size dependence, together with unique angular independence. The free‐standing, large‐scale nanoporous graphene with 2D electronic properties and high electron mobility holds great promise for practical applications in 3D electronic devices.     

Mapping Platinum Species in Polymer Electrolyte Fuel Cells by Spatially Resolved XAFS Techniques

There is limited information on the mechanism for platinum oxidation and dissolution in Pt/C cathode catalyst layers of polymer electrolyte fuel cells (PEFCs) under the operating conditions though these issues should be uncovered for the development of next‐generation PEFCs. Pt species in Pt/C cathode catalyst layers are mapped by a XAFS (X‐ray absorption fine structure) method and by a quick‐XAFS(QXAFS) method. Information on the site‐preferential oxidation and leaching of Pt cathode nanoparticles around the cathode boundary and the micro‐crack in degraded PEFCs is provided, which is relevant to the origin and mechanism of PEFC degradation.     

Photochemical Behavior of Single‐Walled Carbon Nanotubes in the Presence of Propylamine

This report describes the photochemical behavior of single‐walled carbon nanotubes (SWNTs) in the presence of propylamine. The SWNTs are characterized by absorption and Raman spectroscopy. The spectral changes due to photoirradiation indicate that reactions occur predominantly with the metallic SWNTs and small‐diameter SWNTs. The detection of amine radicalcation species by ESR spectroscopy reveals photoinduced electron transfer from the amine to the excited SWNTs. After exposure of the photoirradiated SWNTs to air, the characteristic spectra were recovered, except for that of the small‐diameter SWNTs. The results suggest that, after photoreduction of the SWNTs, subsequent selective sidewall functionalization of the small‐diameter SWNTs occurs.     

Investigation of the biosynthesis of acetyl-CoA and oxaloacetic acid from pyruvic acid and the quantitative evaluation of incorporated 13C-labeled l-alanine in Arthrobacter hyalinus

Studies on the contribution to acetyl-CoA and oxaloacetic acid from the pyruvic acid transformation from l-alanine in Arthrobacter hyalinus were conducted by means of feeding experiments with l-[1-¹³C]alanine and l-[3-¹³C]alanine, followed by an analysis of the labeling patterns of coproporphyrinogen III using ¹³C NMR spectroscopy. The results demonstrated that l-alanine was transformed via pyruvic acid to both acetyl-CoA and oxaloacetic acid. Additionally, the quantitative analysis indicated that pyruvic acid was transformed to acetyl-CoA and oxaloacetic acid in the ratio of 1:0.8.     

Evaluations of vertical resolution of conductive polymer three-dimensional microstructures photofabricated in transparent polymer sheet

Conductive polymer three-dimensional microstructures were photofabricated utilizing the two-photon absorption of a sensitizer dye. The resulting three-dimensional structures were excised from the transparent polymer sheet using a micro-manipulator. The processing precisions for the vertical direction of the conductive polymer three-dimensional microstructure obtained in the transparent polymer sheet were evaluated in the present study. As a result, for the configurations of the obtained polypyrrole line deposition, the line height/line width ratios were around 5: 1; this ratio is higher than that of other UV resin works (h: w 2:4–3: 1) and the cross section distortion is not negligible for maintaining the higher reproducibility of the photofabrication.